Rivet Shelving


Single Rivet Shelving Units
Single rivet beam hight-desity shelving is designed to provide for maximum vertical clearance between shelves. Access to stored item from all sides is possible because side and back cross braces are not necessary for stability. Add-on units assemble quickly without special tools by using a common tee post between units. Finished in light putty baked enamel.

Features: All sections are equipped with 6 levels including 5/8" particle board; Hight density shelf beams provide maximum space between shelf levels; Common tee posts between starter and add-on unit; Shelf levels adjust on 1-1/2" centers; Fast easy assembly; No special tools needed; Optional heavy duty single rivet shelf beams available for added capacity.

Double Rivet Shelving Units
Speedi-Built bulky shelving is designed to provied an economical solution for the storage of retail, wholesale or industrial goods. Installation can be done without special tools in a minimum amount of time. All steel parts are finished in attractive light putty baked enamel.

Features: 48" to 96" wide beams; Access to stored items from all sides; Choice of beam capacity to meet you storage requirement; Easy assembly without special tools; Units available in 84" and 120" heights; All sections are equipped with 4 levels including 5/8" particle board; All sections over 48" wide are equipped with center support poer level.
 Easy assembly-all you need is rubber mallet.
Angle Post
Item
Size
(Length)
Weight
(LBS)
P2.5
2.5'
1.42
P3
3'
1.80
P4
4'
2.39
P5
5'
3.01
P6
6'
3.59
P7
7'
4.18
P8
8'
4.79
P9
9'
5.35
P10
10'
6.11
P12
12'
7.18
Heavy Angle Post
Item
Size
(Length)
Weight
(LBS)
HP7
7'
5.73
HP8
8'
6.52
HP10
10'
8.07
HP12
12'
9.97
HP14
14'
11.63
HP16
16'
13.29
HP18
18'
14.95
Flower Post
Item
Size
(Length)
Weight
(LBS)
FP6
6'
5.12
FP6.5
6.5'
5.53
FP8
8'
6.81
FP10
10'
8.49
FP12
12'
10.21
Tee Post
Item
Size
(Length)
Weight
(LBS)
TP3
3'
3.90
TP4
4'
5.20
TP5
5'
6.50
TP6
6'
7.81
TP7
7'
9.11
TP8
8'
10.41
TP10
10'
13.01
TP12
12'
15.61
Single Rivet Beam
Item
Size
(Length)
Weight
(LBS)
SR12
12"
0.46
SR18
18"
0.69
SR24
24"
0.93
SR30
30"
1.16
SR36
36"
1.39
SR42
42"
1.63
SR48
48"
1.84
SR36
36"
2.36
SR48
48"
3.17
SR60
60"
3.96
Double Rivet Beam
Item
Size
(Length)
Weight
(LBS)
DR12
12"
0.68
DR15
15"
0.84
DR18
18"
1.01
DR24
24"
1.35
DR30
30"
1.68
DR36
36"
2.56
DR42
42"
2.98
DR48
48"
3.39
DR60
60"
4.30
DR69
69"
4.89
DR72
72"
5.10
DR96
96"
6.81
Low Profile Double Rivet Beam
Item
Size
(Length)
Weight
(LBS)
LPDR24
24"
1.13
LPDR36
36"
1.69
LPDR48
48"
2.25
Double Rivet Zee Step Beam
Item
Size
(Length)
Weight
(LBS)
DZ12
12"
0.63
DZ18
18"
0.94
DZ24
24"
1.26
DZ30
30"
1.58
DZ32
32"
1.68
DZ36
36"
2.27
DZ42
42"
2.65
DZ48
48"
3.03
DZ60
60"
3.79
DZH69
69"
5.17
DZH72
72"
5.40
DZH96
96"
7.20
Double Rivet Channel Beam
Item
Size
(Length)
Weight
(LBS)
DC48
48"
4.07
DC72
72"
6.11
DC96
96"
8.14
DCH72
72"
9.62
DCH96
96"
12.86
Shelf deck support
Item
Size
(Length)
Weight
(LBS)
SDS12
12"
0.69
SDS18
18"
0.94
SDS24
24"
1.25
SDS30
30"
1.55
SDS36
36"
1.85
SDS48
48"
2.47
Tie Plates

Post Connect
Poll formed: 1-1/2" x 1-1/2", punched on 1-1/2" centers for fast adjustment. Used as upright post for standard rivet units. All posts are supplied in one piece lengths.
Poll formed: 1-7/8" x 1-7/8", punched on 1-1/2" centers for fast adjustment. When maximum capacity and stability are essential, the heavy duty angle post is the proper choice. Ideally suited for two level shelving, storage deck and high rise shelving applications.
Poll formed: 1-1/2" x 2-3/8", punched on 1-1/2" centers for fast adjustment. Used as upright post for standard rivet units. All posts are supplied in one piece lengths.
　
Used as a shelf support on intermediate rack shelf spaces. One rivet on each end. For use as left to right and front to back shelf support. See beam load table for capacity.
Angle shelf support rigidizes rack unit front to rear or side by side. Eliminates braces. "R" is for beams punched to accept record storage box supports.
　

Reduced profile increases vertical clearance by 1-1/4" between shelf levels when used in place of Double Rivet Angle Beams. Protects decking edges. When used as the bottom shelf on Single Rivet Units clear space between the bottom and first shelf is increased by 1-1/4".
For left to right shelf support. Provides for a higher capacity than heavy duty double rivet angle beams. When a bottom shelf is required to be at the bottom level, use a heavy duty double rivet angle beam.

Used with double rivet beams to provide front-to-rear support for shelf deck and provides added stability to beams. Supplied with bolts and wing nuts for fast assembly.
　

　

HOMEPAGE | ABOUT US | CONTACT US
New Products | CAD Drawings | Rack Accessories
Rivet Shelving | Wide Span Rack | Pallet Rack | Roll Formed Cantilever Rack | Bulk Storage Rack
Structural Cantilever Rack

NINGBO XINGUANG RACK CO.,LTD. & NINGBO JIABO RACK CO.,LTD.
No.168, Qihang North Road,
Yinzhou Binhai Investment and Business Incubation, Ningbo, China 315145
Fax: 0086-574-87897274, 88194978
Tel:0086-574-87875723, 87877494, 88194980
E-mail: sales@xinguangrack.com
Copyright ©2001-2008 Ningbo Xinguang Rack CO.,LTD.& Ningbo Jiabo Rack Co.,Ltd. All Rights Reserved